Water Damage and Mold FAQs

12/18/2017 (Permalink)

Water Damage and Mold FAQs

Mold growth usually occurs in moist areas with high humidity, and it is important you address any water damage issues immediately. Since mold spores exist practically everywhere, high-moisture areas are likely to grow mold easily and with impudence. Here are some FAQs about damage caused by water and mold growth.

Where Does Moisture in the Home Typically Come From?

There are many ways water can enter the home: foundation leaks, water pipe leaks, poor drainage around the home, etc. Floods, sewage backups and appliance valve failures can cause particular trouble because they may result in significant water inside the home.

What Dangers Are Associated With Damage From Water?

When water pools in a home, building materials act as a wick and soak up some of the water. If the water is contaminated, everything the water comes in contact with will need to be restored. Contaminated water may contain a variety of microbes, including viruses and bacteria.

Mold growth is another concern. If left unchecked, it can quickly spread by releasing spores into the air. The mold starts in wet areas but can end up contaminating dry areas of the home as well. The longer moisture is allowed to sit in the home, the more problems it is likely to cause.

How Is Damage Handled by Professionals?

Professionals in Clear Lake, Texas will start by removing any standing water. They will then take care of any compromised material. Once the area is free of water and materials, the space will be dried out and disinfected, which may take several days.

The home will be thoroughly inspected for the presence of mold. If it is found, mold remediation processes will be used to remove the mold and disinfect the area. If larger colonies are found, technicians may need to contain the area and physically remove any moldy materials.

Dealing with damage from water and mold is a frustrating process. Hire professionals in water damage and mold remediation to ensure the job is done properly. Visit http://www.SERVPROclearlake.com for more information on mold.